LOCTITE 270 Ασφαλιστικό Σπειρωμάτων 10ML
Threadlocking Adhesive - high strength. Permanent locking. Suitable for all metal threaded assemblies.
LOCTITE® 270 is a high-strength threadlocker for maximum efficacy in the securing and sealing of bolts, nuts and studs to prevent loosening due to vibration. The product serves to permanently lock assemblies which must not come loose. It works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids. Can be disassembled by heating to 300°C.
- High-strength general threadlocker for maximum efficacy
- Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
- Works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces)
- Proven to be tolerant of minor contamination due to industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids
- Permits disassembly with hand tools
- Can be disassembled by heating to 300°C
- P1 NSF Reg. No.: 123006
-
For best results, clean all surfaces (external and internal) with a LOCTITE® cleaning solvent and allow to dry.
-
If the cure speed is too slow, use appropriate activator. Please see the Cure Speed vs. Activator graph for reference. Allow the activator to dry when needed.
-
To prevent the product from clogging in the nozzle, do not allow the tip to touch metal surfaces during application.
-
For Thru Holes, apply several drops of the product onto
the bolt at the nut engagement area.
-
For Blind Holes, apply several drops of the product to the
lower third of the internal threads in the blind hole, or the
bottom of the blind hole.
-
For Sealing Applications, apply a 360° bead of product
to the leading threads of the male fitting, leaving the first thread free. For bigger threads and voids, adjust product amount accordingly and apply a 360° bead of product on the female threads also.
-
Assemble and tighten as required.
For Disassembly
-
Remove with standard hand tools.
-
In rare instances where hand tools do not work because
of excessive engagement length, apply localized heat to nut or bolt to approximately 250 °C. Disassemble while hot.
-
Apply localized heat to the assembly to approximately 250 °C. Disassemble while hot.
For Cleanup
1. Cured product can be removed with a combination of soaking in a Loctite solvent and mechanical abrasion
| Κατασκευαστής | LOCTITE |
|---|---|
| Χώρα Κατασκευής | |
| Διαθεσιμότητα | Available in store / Delivery 1 to 3 days |
| NO COD | Όχι |
