ΛΑΔΙ ΑΥΤΟΚΙΝΗΤΟΥ MOTUL X-POWER 10W60 1lt 100% SYNTHETIC

ΛΑΔΙ ΑΥΤΟΚΙΝΗΤΟΥ MOTUL X-POWER 10W60 1lt
Εφαρμογή: Λιπαντικά Κινητήρα
Ποιότητα: 100% Συνθετικά
Ομάδα Προϊόντων: Αυτοκίνητο
Ιξώδες: 10W60
ACEA Προδιαγραφές: ACEA A3 / B4
API Προδιαγραφές: API SN / CF ( Backwardly compatible with API SJ, SL, SM )
100% synthetic lubricant, specially designed for high performance cars with naturally aspirated ,compressed or turbocharged engines.
TYPE OF USE
10W-60
High Performance Gasoline Engine Oil 100% Synthetic
100%syntheticlubricant,speciallydesigned for high performance cars with naturally aspirated ,
compressed or turbocharged engines.
Recommended for Aston Martin / Alfa Romeo GT séries / Lotus / BMW M Séries / Maserati / Ferrari V12 / TVR / Lancia / Jaguar / Audi R8 5.2L GT …
Suitable for all kind of operating conditions and for all type of fuels : leaded or unleaded Gasoline, ethanol, LPG and Diesel.
Compatible for catalytic converters.
PERFORMANCES
STANDARDS ACEA A3 / B4
API SN / CF ( Backwardly compatible with API SJ, SL, SM )
The ACEA A3 / B4 and API SN standards requires from the lubricant an outstanding detergent / dispersant power, a better viscosity increase resistance against deposits, and high lubricating properties such as wear protection and high temperature resistance for better controlled oil consumption and perfect engine protection over the oil drain interval.
8100 X-power 10W-60 provides longer lasting protection in lower or higher mileage engines for a longer lifetime of the vehicle.
Extra oil film thickness reduces oil burn off in the combustion chamber and helps preventing oil leaks. T
he outstanding fluid strength provides high engine protection and stable oil pressure over the drain
interval.
RECOMMENDATION
Drain interval : Refer to manufacturers’ recommendations and tune to your own use. MOTUL 8100 X-power 10W-60 can be mixed with synthetic or mineral oils.
Can be used on Diesel engines requiring performances.
Before use always refer to the owner manual or handbook of the vehicle.
PROPERTIES
Viscosity grade
Density at 20°C (68°F)
Viscosity at 40°C (104°F) Viscosity at 100°C (212°F) HTHS viscosity at 150°C (302°F) Viscosity Index
Pour point
Flash point
Sulfated ash
TBN
SAE J 300 ASTM D1298 ASTM D445 ASTM D445 ASTM D4741 ASTM D2270 ASTM D97 ASTM D92 ASTM D874 ASTM D2896
10W-60
0.851
163.4 mm2/s 23.5 mm2/s 5.81 mPa.s
174
-36°C / -32.8°F 242°C / 467.6°F 1.09 % weight 10.1 mg KOH/g